New flashing
All flashing is replaced, not reused matched to the new roof.
Cedar Shake Roofing
Cedar Shake Roof Replacement Butler, NJ
Replacing a cedar roof in Butler starts with removing every old shake and strip of felt interlay, then fixing the boards underneath before the new roof goes on, so the new roof starts on solid, dry wood. Call (862) 356-0005 to reach a local roofer.
Every cedar roof eventually wears past what spot repairs can fix. The shakes erode thinner every year, the butts rot, the nails rust through and the wood turns so brittle that a roofer cannot replace one shake without cracking three more. At that point a full replacement protects the sheathing and framing underneath.
Unlike some asphalt roofs, cedar has to come off completely. Covering old shakes traps wet wood under the new roof, leaves bumps and adds fuel load, which is why codes generally require a tear-off. Tear-off also lets the roofer see and fix every rotted board.
What sits under the shakes shapes the whole project. If new cedar goes back on, sound spaced boards can stay, but switching to another material means sheathing the roof solid. Damaged boards are swapped before anything new goes on.
Depending on what the roofer finds, cedar shake roof replacement in Butler, NJ can go hand in hand with cedar shake roof installation and cedar shake roof repair.
Dealing with this in Butler, NJ right now? Call (862) 356-0005 to reach a nearby roofing contractor.
Call nowThe process
What happens during a cedar roof replacement
Here is how a roofer usually handles a full cedar replacement.
Plan the new roof
Before any tear-off, you decide what goes back on, since that choice decides whether the deck needs solid sheathing. Permits are pulled and any neighborhood or fire rules are checked.
Site prep
Tarps and plywood cover plants, decks and walkways, because cedar tear-offs throw off heavy debris and thousands of old nails. Attic belongings under the roof are worth covering too, since dust falls through spaced boards.
Tear-off
Every shake, felt interlay strip, old nail and rusted valley metal comes off, down to bare boards. Any older layers found underneath are removed at the same time.
Re-deck the roof
The roofer replaces soft boards and adds solid sheathing where the new material requires it. Nothing else on the roof works if the deck is weak.
Dry in the roof
Ice and water membrane goes along the eaves and valleys, then underlayment covers the deck and new drip edge is installed. For new cedar, a breathable mat or spaced boards keep air moving under the shakes.
Final install
New roofing is installed with fresh flashing at every wall, valley and penetration. Cleanup includes rolling a magnet over the lawn for nails.
What is included
Parts of a cedar roof replacement
Ice barrier
Ice and water membrane goes in at the eaves and valleys before the finish roof goes on.
Old roof removal
Every layer comes off so the deck can be inspected.
Deck repair
Damaged sheathing is renewed for the new roofing material.
Debris removal
Debris is removed daily and stray nails are collected.
Related service
Cedar Shingle Roof Replacement Butler, NJ
Sawn cedar shingles were once the default roof on many older houses, and many are now due for replacement. Those roofs were usually laid on spaced boards, and some were later covered with a layer of asphalt shingles, so a tear-off can uncover more than one roof. With everything removed, the boards are checked and repaired or covered with solid sheathing.
Replacing sawn shingles with new sawn shingles keeps the tight, even look of the original roof. If your home is in a historic area, check what materials are allowed. Ask a Butler roofer to compare new cedar shingles with look-alike options for your home.
Local help
Cedar Shake Roof Replacement Near Me
Cedar roofs around Butler reach replacement age on older homes first, often after years of shade and moss. Across Butler and nearby towns like Riverdale, Bloomingdale, Pompton Plains and Pompton Lakes, some owners put cedar back to keep the look while others switch to synthetic shakes, architectural shingles or metal, and a roofer can lay out the options side by side.
For cedar shake roof replacement in Butler, NJ or nearby towns like Riverdale, Bloomingdale, Pompton Plains and Pompton Lakes, call (862) 356-0005 to reach a roofer who covers your street.
Roofs in this climate
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Butler, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why not wait
Drier ceilings
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers who know Butler
Roofers in Butler know the roof types and weather wear common in local homes.
Know what happens next
Ask your questions before you agree to anything.
Common questions about cedar shake roof replacement
How many days does it take to replace a cedar roof?
The timeline is usually a few days to a week or more for bigger homes. Cedar tear-offs produce a lot of debris, and re-decking adds time. The roof is never left open overnight.
Will my roof deck need to be replaced?
The answer hinges on the new roofing material. If you switch from cedar, the roof will need solid sheathing. Any rotted boards are replaced either way.
What can I replace my cedar shake roof with?
New cedar is one option, but there are several others. Synthetic or composite shakes imitate the look with less upkeep, architectural asphalt shingles cost less and are common, and metal or stone-coated steel lasts a long time. Switching away from cedar usually means adding solid decking.
Should I put a new cedar roof back on?
That comes down to what you want from the roof. New cedar keeps the natural look and suits many older homes, but it needs regular cleaning and some care to reach its full life. Ask to compare cedar with alternatives first.
Can new roofing go over old cedar shakes?
Roofing over cedar shakes is a bad idea and is not allowed under most codes. The shakes are uneven and hold moisture, so the new roof sits on a lumpy, damp base, and the old wood adds fuel load. Removing the old roof is the right first step.
More questions? Call (862) 356-0005
Other services that may help
Cedar Shake Roof Installation
Cedar roof installation from the sheathing and starter course up to the ridge, laid to the slope and climate of the house.
Learn moreCedar Shake Roof Repair
Replacing split, cupped or missing shakes, clearing moss and fixing valleys and ridge caps, so a sound cedar roof keeps shedding water.
Learn moreRoof Replacement
A complete new roof from the deck up when repairs no longer make sense, so the house is dry for decades instead of seasons.
Learn moreShingle Roof Replacement
Replacing an aging shingle roof once repairs no longer hold, including permits, cleanup and a final check.
Learn more
Looking for something else?
See all roofing servicesGet cedar shake roof replacement help in Butler
Call now for Butler cedar shake roof replacement and help in the towns around it.